4" Indoor/Outdoor Sticker

These are PERMANENT STICKERS for indoor or outdoor use. 
 
HOW TO APPLY: Using the side of a debit/credit card works just as well...if not better than using a squeegie.
 
1. Prep Your Surface and Pre-Squeegee Your UV-DTF Permasticker
Prepping the Area - When necessary, clean the surface of your item before applying the PermaSticker using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.
Pre-Squeegee - After cutting your sticker/decal out, place the design face down with the white side facing up. Using the padded end of the included squeegee, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.
2. Separating The Clear Carrier Sheet From The White Backing
To detach the clear carrier sheet from the white backing, make a small tear away from the design. Gently peel the clear carrier sheet, watching to ensure the whole design lifts off the white backing. Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee, and attempt to peel again from a different angle. You’ll get a feel for it with experience.
3. Placing Your UV-DTF PermaSticker Onto Your Item
First, identify the placement area on your item.
 Carefully place the design onto the placement area with two hands controlling the placement.
4. Completing the Transfer Process
After placing the design, firmly squeegee it 2-4 times. Peel slowly, watching to ensure all elements stick. Again, if any part of the sticker stays with the clear transfer sheet. lay it back down, squeegie that area and try peeling again.